The MyFuge Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples.

An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor.

Features:

• Clik-N-Lok INSTANT rotor attachment
• Eight position microtube rotor
• Storage compartment for PCR rotor & 0.5ml adapters
• Near silent operation
• Decelerates in just one second
• Four position PCR strip rotor

SPECIFICATIONS

The SIEVA-3 Filtration Centrifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit.

Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.

Features:

• High-speed, up to 10,000 rpm
• Transparent lid
• Stainless steel housing, chamber and parts
• Perforated and non perforated basket available
• Optional connection for external temperature control

SPECIFICATIONS

The SIEVA-3 Filtration Centrifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit.

Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.

Features:

• High-speed, up to 10,000 rpm
• Transparent lid
• Stainless steel housing, chamber and parts
• Perforated and non perforated basket available
• Optional connection for external temperature control

SPECIFICATIONS

C1D1 Labs C1D2 certified centrifuge

C1D1 Labs C1D2 certified centrifuge is designed to optimize production for your processing lab. This C1D2-rated centrifuge is certified with an Engineer Peer Review to ensure quality and compliance. Capable of processing 600 lbs of biomass in an 8-hour shift, this centrifuge is the perfect choice for any extraction facility.

Need to process large amount of biomass? With our new line of C1D2 centrifuges for ethanol extraction. Paired ultra-low cooling tech, these centrifuges are able to scale your production, while maximizing efficiency. When running at these ultra-low temps, our consumers are able to to filter fats and lipids directly in-line with the C1D2 extraction centrifuge. With a steady spin, and large capacities, our centrifuges are high-quality. Each jacketed centrifuge comes with an explosion proof touch screen control panel for easy programming and control over the machine. Refine your standard operating procedures and get the most out of your centrifuge extraction system. Each extraction systems comes certified with an engineer peer review, guaranteeing your acceptance through your local municipality.

Order your 30 Gallon, 50 Gallon, 100 Gallon, and 200 Gallon C1D2 Centrifuges from a company that can provide a complete solution. For the first time, we are now offering to design your lab at no extra cost with purchase of a centrifuge extraction system & modular extraction booth. Each design comes with a PE fire protection engineer report stamped for your state, streamlining your entire project through site planning. This is a slingshot for the entire project, getting you operational faster! Have confidence in the equipment you order.

Our 30G – 50G – 100G – 200G C1D2 Centrifuge Extraction Systems are now available for order. Process more biomass with a bigger centrifuge, these new large extraction systems can process 4,000-5,000 lbs a day. With our new fire rated extraction booths, we are able to create F1 occupancy facilities that can produce up to 18,000 lbs a day. Our centrifuge extraction systems have both high throughput and ultra-low temps. With our chilling solutions you will be able to extract faster, filter your fats and lipids in-line. Creating a more efficient solution to creating a purified extract. See our pricing below:

C1D1 Labs LLC is now proud to also be offering installation, training, warranty, and maintenance. Each centrifuge comes with a 1 year warranty that covers all electric and mechanical parts on the machine. Our full-time support team will be there to answer your technical questions whenever you need them. We will even fly out to your facility and teach you how to run the centrifuge and any other equipment you need help with. Our experienced technicians are well-known and respected for their knowledge and ability to educate.

Don’t forget to ask about our install, training, warranty and maintenance. Also, purchase a booth and a centrifuge and get your lab designed for free!

Features

• C1D2 rated
• Certified with an Engineer Peer Review
• 600 lbs in an 8-hour shift
• Ultra-low temps
• Optional cold injection
• 304/316 stainless steel
• Steel jacket insulation and additional neoprene jacket
• Explosion-proof 5 HP motor
• Bi-directional agitation
• Heavy-duty spin drying
• Easy to operate
• Custom wash and spin cycle options

Requirements

• 208V 3~phase, 20 amps
• Purge air requirements for control panel: 31 CFM
• Consumables: Nitrogen
• Accessories: C1D1 Labs 200 micron mesh bags
• Suggested chiller for 30-gallon model: HUBER Unistat 815 -85C to 250C with Pilot ONE

Dimensions

• Setup/shipping dimensions: 36.5 x 46.5 x 50″ / 67 x 28 x 99″ (WxLxH)
• Setup/shipping weight: 1,500 / 1,760 lbs

Outside of the centrifuge itself the list below is what we include or install on the centrifuge

• Control Panel installed
• Vent cap tree installed
• Vent Cap
• Pressure relief valve
• Pressure gage
• Neoprene Jacket Installed
• Nitrogen regulator included
• Nitrogen tube included
• Low pressure regulator included
• Back up belt included
• Back up gaskets included
• Grease and grease gun included
• 3 biomass bags included
• Motor and control panel tested
• Housing and basket deep cleaned

The Hettich EBA 280 is a high-performance centrifuge with easy to exchange rotors including a 90 swing-out rotor for flat separation of all standard blood tubes. The EBA 280 model S is used for rapid separation of your STAT chemistry, coag. and pediatric samples with a max. speed of 6,000 RPM in a swing-out rotor. The EBA 280 is ideal for serology, manual cell washing and clinical chemistry applications.

SPECIFICATIONS

The Hettich MIKRO 200R is a centrifuge features a high-capacity and high RCF for fast results. Capable of holding up to 30 tubes per run at an RCF of up to 21,382 the MIKRO 200 reduces spin time while delivering optim

Fast cooling for greater efficiency. Available with optional temperature control (-10 to +40 °C), the compaal separation results. Fast cooling for greater efficiency. Available with optional temperature control (-10 to +40 °C), the compact MIKRO 200 R cools down to +4°C in just 10 to 15 minutes using the Fast-Cool function.

Features

• MIKRO 200 R cools down to +4°C in just 10 to 15 minutes using the Fast-Cool function.
• Rotor variety for a multi-functional work-flow. For both pediatric tubes and standard microliter tubes, users have the option of a 24-place or 30-place angle rotors. The MIKRO 200 also offer a 4-place PCR strip rotor and 20-place cryo tube rotor for even greater versatility. An 18-place rotor for spin column kits is designed to protect the tube cap from breaking during centrifugation and is also available with autoclavable, phenol resistant, bio-containment lid.
• Low cost alternative for Lipemic samples. The MIKRO 200 eliminates the need for a limited use, highcost, ultra-centrifuge and offers a solution for clearing Lipemic samples at a fraction of the cost. Process your samples quickly, in-house, and do away with send-outs.

SPECIFICATIONS

The Hettich MIKRO 200 is a centrifuge features a high-capacity and high RCF for fast results. Capable of holding up to 30 tubes per run at an RCF of up to 21,382 the MIKRO 200 reduces spin time while delivering optimal separation results. Fast cooling for greater efficiency. Available with optional temperature control (-10 to +40 °C), the compact MIKRO 200 R cools down to +4°C in just 10 to 15 minutes using the Fast-Cool function.

Features

• Fast cooling for greater efficiency. Available with optional temperature control (-10 to +40 °C), the compact MIKRO 200 R cools down to +4°C in just 10 to 15 minutes using the Fast-Cool function.
• Rotor variety for a multi-functional work-flow. For both pediatric tubes and standard microliter tubes, users have the option of a 24-place or 30-place angle rotors. The MIKRO 200 also offer a 4-place PCR strip rotor and 20-place cryo tube rotor for even greater versatility. An 18-place rotor for spin column kits is designed to protect the tube cap from breaking during centrifugation and is also available with autoclavable, phenol resistant, bio-containment lid.
• Low cost alternative for Lipemic samples. The MIKRO 200 eliminates the need for a limited use, highcost, ultra-centrifuge and offers a solution for clearing Lipemic samples at a fraction of the cost. Process your samples quickly, in-house, and do away with send-outs.

SPECIFICATIONS

The Hettich MIKRO 185 is a centrifuge offering greater capacity and higher performance, the MIKRO 185 delivers a variety of rotor options with or without bio-containment and is backed by a limited 5-year warranty. Users have the option of 12-place, 18-place, and 24-place angle rotors that fit both pediatric tubes and standard microliter tubes.

Features

• Ultra Compact & Flexible. The MIKRO 185 offers the choice of 4 rotors, offering microliter, pediatric and spin column packages & bio-containment lids for applicable rotors.
• Protect your samples. An 18-place rotor for spin column kits is designed to protect the tube cap from breaking during centrifugation and is also available with bio-containment lid.
• Adjustable parameters for flexible application control. The MIKRO 185 features a flexible control panel allowing you to adjust your application parameters. Adjust time, speed (RPM), RCF and braking with the easy to use LCD display. Pulse key available allowing you to hold and press start key for short centrifugation runs.
• Visual and audible end-of-cycle notification for a productive workflow. Customizable and independent control of visual and/or audio alarms can be set for end of cycle notification. This provides an across-the-room indication that your unit is ready for the next operation.

SPECIFICATIONS

The Hettich MIKRO 220 is a centrifuge features a high capacity 48-place angle rotor and 60-place drum rotor for maximum productivity. Higher RCF values reduce production time and offers cost saving capability. Additional rotors include a 24-place swing-out rotor for microliter tubes, 6-place PCR strip rotor and rotors for conical tubes, blood tubes, pediatric tubes, urine tubes and hematocrit capillaries.

Features

• Micro Variety. The MIKRO 220 offers 4 different Microliter Tube Packages ranging from 24 to 48 tubes per run with optional bio-containment. The Microliter Tube Strip Package is also available, capable of spinning up to 6 PCR strips.
• Process Lipemic samples and save thousands on equipment. Don’t struggle with the high-cost of processing lipemic samples. Process your samples quickly, in-house, and do away with send-outs with Hettich high-speed micro centrifuges.

SPECIFICATIONS

The Hettich MIKRO 220 R is a -20C to +40C refrigerated centrifuge features a high capacity 48-place angle rotor and 60-place drum rotor for maximum productivity. Higher RCF values reduce production time and offers cost saving capability. Additional rotors include a 24-place swing-out rotor for microliter tubes, 6-place PCR strip rotor and rotors for conical tubes, blood tubes, pediatric tubes, urine tubes and hematocrit capillaries.

Features

• Compact refrigerated centrifuge for blood tubes. The MIKRO 220 R centrifuge provides compact refrigeration for spinning 12 blood tubes at 6,000 RPM.
• Micro Variety. The MIKRO 220 offers 4 different Microliter Tube Packages ranging from 24 to 48 tubes per run with optional bio-containment. The Microliter Tube Strip Package is also available, capable of spinning up to 6 PCR strips.
• Save time and energy with robust and quick temp. control. Available with optional temperature control (-20 to +40 °C), the MIKRO 200 R cools down to +4°C in just 10 to 15 minutes using the Fast-Cool function. This feature saves on energy by reducing the amount of time necessary to pre-cool before centrifugation.
• Process Lipemic samples and save thousands on equipment. Don’t struggle with the high-cost of processing lipemic samples. Process your samples quickly, in-house, and do away with send-outs with Hettich high-speed micro centrifuges.

SPECIFICATIONS